Probability of a ductile fracture

The present paper studies ductile fracture by a random fractal and calculates the fracture probability q of a ductile fracture. The fracture probability q is sensitive to the number n (microvoid size) and the probability p of forming microvoids. There are two critical probabilities p_c1 and p_c2. When pp_c2 = 1-1/n², the fracture probability q is 100%, the ductile fracture occurs with probability 1; when p_c2 > p>p_c1, there is a positive probability q (1>q>0), the fracture probability q increases with increasing probability p and/or decreasing number n; when p<p_c1, the fracture probability q is zero (in fact less than 0.00001), the fracture does not occur. The critical probabilities p_c1 and p_c2 increase with increasing n. When 1-1/n²>p>1-1/n, though a ductile fracture does not occur, there is at least a macrovoid which passes through the transverse plane of the specimen.     

有限厚度冻冰相变过程的传热研究

1前言确定相界面的瞬态位置是求解冻冰相变问题的重要部分。目前对于有限区域相变问题还没有可靠的精确解[1]。冻冰过程最简单分析方法是忽略固液两相的显热变化，建立相界面移动的准稳态传热关系式，近似预测固一液相变位置[2-4]。本文将考虑液、固相中显热的变化，对有限厚平板冻冰过程，采用精确解与积分解相结合的方法，分析冰层冻结过程中的固一液相界面、边界热流密度和贮入固、液相内的冷量随冻冰时间的变化规律。2物理一数学模型分析该研究的问题是一块贮冷板的两侧面直接与一个低温蒸发器直接接触，使贮冷板内冻冰贮冷。通常蒸发器…     

A study on the nonstoichiometry of tin oxides by coulometric titration

In this investigation, nonstoichiometries and defect structures of tin oxides were studied between 694 and 990 K by coulometric titration using solid state electrolyte (YSZ) cells. The relationship between nonstoichiometry of the oxide (x) and equilibrium oxygen partial pressure (P_o2) was expressed by the proportionality: xP_O2^−1/6. An intermediate oxide phase, Sn₃O₄ between Sn and SnO₂ was observed in the temperature range of 696–732 K. The standard Gibbs energy of formation of Sn₃O₄ via the reaction; was found to be ΔG^o_Sn3O4 = −1163960+417.36 T (J/mol). The standard Gibbs energy change for the defect formation reaction in SnO_2−x was calculated to be ΔG^o_SnO2−x = 3.05×10⁵−38.97 T (J/mol)).     

室温离子液体FeCl3-BPC体系的研究

利用差示扫描量热法(DSC)建立了无水三氯化铁和氯化正丁基吡啶(BPC)二元体系相图. 依据相图, FeCl₃和BPC形成室温离子液体的窗口是x＝0.26～0.58; 室温离子液体的深度是80 ℃. 利用UHF/6-31G^*对FeCl₃, FeCl₄^－, Fe₂Cl₇^－等配合物的几何结构、键长、能量和Raman频率进行优化, 从头算和Raman光谱证实了相图中FeCl₃摩尔分数x＝0.50处有稳定化合物存在, FeCl₄^－是主要阴离子; x＝0.67处, FeCl₄^－, Fe₂Cl₇^－是主要阴离子.     

dual stage preconcentration system for flame atomic absorption spectrometry using flow injection on-line ion-exchange followed by solvent extraction

A dual stage preconcentration system based on flow injection on-line ion-exchange and solvent-extraction has been developed for flame atomic absorption spectrometry. Lead is taken as a model trace element. A column packed with Amberlite IRC-718 cation exchanger is incorporated into the FI manifold. The analyte is retained on the column by time-based sample loading and eluted by 1 mol/L HNO₃. The eluate is subsequently merged with potassium iodide and tetrabutylammonium bromide (TBABr), and isobutyl methyl ketone (IBMK). Lead is extracted on-line into IBMK as the ion-pair formed between the iodoplumbate anion and tetrabutylammonium cation. The organic phase is separated from the aqueous phase by a gravity phase separator. 50 μL of concentrate is introduced into the nebulizer-burner system of the spectrometer. An enhancement factor of 550 is achieved with a 30 mL sample consumption at a sampling frequency of 30/h. The precision (relative standard deviation) is 2.4% at 10 μg/L level and the detection limit is 0.3 μg/L (3 σ). The method was successfully applied to the determination of lead in water samples. Received: 19 March 1997 / Revised: 24 June 1997 / Accepted: 27 June 1997     

冰晶石—氧化铝熔体结构的Monte Carlo模拟

用Monte Carlo法计算机模拟研究了冰晶石-氧化铝熔体结构。计算了熔体中各种离子的偏经向分布函数、若干局部结构的表征函数以及熔体中各种离子的位能分布。     

An Ozone Generator of Miniaturization and Modularization with the Narrow Discharge Gap

The method of ionization discharge has a key action on the process of the ionization and decomposition of O₂ molecule as well as the re-decomposition of O₃ molecule. In this paper, an ozone generation of miniaturization which was fabricated by stacking discharge modules with rectangle is introduced, only volume of 23.0×53.0×42.0 cm³ for ozone production capacity of 1 kg/hr. In addition, the ozone concentration and its production efficiency are significantly improved in comparison with a conventional ozone generator, which have the highest ozone concentration of 308 g/Nm³ and the production efficiency of 118 g/kWh at ozone concentration of 200 g/Nm³.     

碳化硅纳米晶须的微波合成

SiC nanometer whisker, whose diameter was about 50nm and purity was 98.54%, was synthesized by microwave heating in an atmosphere of argon. Char pyrolyzed phenolformaldehyde resin and SiO2 nanometer powder were used as starting materials. The properties of the whisker were determined by XRD and TEM. The mechanism for synthesizing SiC nanometer whisker was discussed.     

Combination of flow injection with capillary electrophoresis: 8. Miniaturized capillary electrophoresis system with flow injection sample introduction and electrogenerated chemiluminescence detection

The combined flow injection (FI)-capillary electrophoresis (CE) system was further exploited by coupling to an electrogenerated chemiluminescence (ECL) detection system. A low-cost miniaturized CE system was developed on a chip platform to provide easy interface both with FI sample introduction and with ECL detection. A falling-drop interface was employed to perform FI split-flow sample introduction while achieving electrical isolation from the CE high voltage. A plexiglas reservoir at the capillary outlet served as both the reaction and detection cell for the ECL reaction, with Ru(bpy)₃²⁺ reagent continuously flowing through the cell. An optical fiber was positioned within the reservoir close to the capillary outlet for transferring the ECL emission to the PMT. The relative positions of the capillary outlet, working electrode and optical fiber as well as reagent renewal flow-rate were optimized to achieve both good sensitivity and separation efficiency under non-interrupted sampling conditions, involving large numbers of samples. An on-column joint often used in other works for isolating the ECL detection system from the CE separation voltage was not found necessary. The performance of the system was illustrated by the baseline separation of proline, valine and phenylalanine with a high throughput of 50 h⁻¹ and plate height of 14 μm for proline under 147 V cm⁻¹ field strength. Detection limits (3σ) were 1.2, 50 and 25 μM and peak height precisions were 1.4, 5.4 and 4.3% R.S.D. (n=9) for proline, valine and phenylalanine, respectively.     

Study of the Kinetics of the Combustion Reaction on Shuangya Mountain Coal Dust by TG

The combustion behavior of Shuangya Mountain (SYM) coal dust has been investigated by means of TG in this paper. The reaction fraction can be obtained from isothermal TG data. The regressions of g(), an integral function of vs. t for different reaction mechanisms were performed. The mechanism of nucleation and nuclei growth is determined as the controlling step of the coal dust combustion reaction by the correlation coefficient of the regression, and the kinetic equation of the SYM coal dust combustion reaction has been established.This revised version was published online in November 2005 with corrections to the Cover Date.